Hello, welcome to visit the official website of Dujiangyan Samsung Woodworking Machinery Factory!
Insight
Hotspot TechnologyLocation reminder:Insight > Hotspot Technology

C—1:Longitudinal feeder,C—2:Longitudinal double-rail double-side milling MX135-8

2019-10-22 15:54:40   Source:    Hits:
C—1:Longitudinal feeder
Function: Positioning and separating, after separating multiple boards, they are conveyed one after another to the next process.
C—2:Longitudinal double-rail double-side milling MX135-800-G
Function: Fine and rapid contour machining of the longitudinal male and female edges of boards, using 6 stations and 12 shafts.
Features: High-strength and high-precision synchronous dual-track is adopted in the running track.
Basic configuration:
1. The high-strength track is adopted in the running chain track, and the linear precision is 0.01 mm.
2. Customized rolling conveying chain with intercept error of 0.005mm;
3. The upper pressure beam system is equipped with a digital display meter to manually adjust the thickness of the corresponding board.
4. Adjustable fixed guiding rule on the right side (female side);
5. Adjustable elastic side pressure roller on the left side (male side);
6. Passive elastic upper and side pressure rollers at the feeding inlet;
7. The upper and lower alloy material platform system is used to control the height difference, the lower alloy platform adopts adjustable fixed type, and the upper alloy platform adopts adjustable air pressure type. Guarantee the equal height of the plate surface, and the equal precision is 0.02 mm.
8. There are six processing stations (with scrapers) on one side, with 12 shafts in total. Each station is equipped with a suction inlet with a diameter of 110mm.
9. The cutter shaft is adjusted by T-type screw, and is equipped with a dial indicator for accurate adjustment. The precision can reach 0.01 mm.
10. The whole width adjustment action is electric screen-touching (frequency conversion control).
11. The machine is equipped with a acoustic enclosure with sound-absorbing cotton inside.
12. The machine is equipped with high-light explosion-proof lamp, which strengthens the adjustment light atmosphere.
Detailed parameters:
Processing width:135-800mm
Processing thickness:4-15mm
Workbench height:1210mm 
Speed of blade spindle:6000-7000rpm
Feeding speed:5-80m/min
Motor power of blade spindle: High Frequency Spindle (transducer control) 
First station: (1 left and 1 right) 8kw, combined stocking cutter, ± 90 degrees, up milling
Second station: (1 left and 1 right) 8kw, backboard rose reamer, ± 90 degrees, up milling
Third station: (1 left and 1 right) 8kw, truing cutter, ± 90 degrees, up milling
Fourth station: (1 left and 1 right) Scraper, ± 90 degrees, positioning milling
Fifth station: (1 left and 1 right) 5.5 kw, locking cutter, ± 90 degrees, up milling
Sixth station: (1 left and 1 right) 10kw, template, ± 90 degrees, up milling
(Note: This processing station is exclusively for the patent lock catch of Unilin and Wallinger)
Feeding electrical machinery: 7.5kw (frequency conversion control)
Blade tool specification: Diameter is 250 (equipped with hydraulic shrink disk), Aperture diameter is 40
Diameter and quantity of suction outlet: 115mm*12*2 (inside and outside)
Overall dimension(mm):Length x width x height:6000x2700x2150
Weight: about 1,000 kg
Copyright 2019 djysx.com All Rights Reserved Shu ICP No. 16029103 WEBSITE:HUCHENG.CN
茄子直播app官方下载地址网站地图